Lab Intermittent Coating Machine For Lithium Battery Electrode Making

 Working Voltage

380V AC

Max. Power Consumption

10 KW ( 30A Air breaker required )

Max. Coating Width

300mm

Thickness adjustable range

0-5mm

Coating thickness (after drying)

20 - 200um (for most kinds of battery electrode coating material)
Note: The dried coating thickness results vary depending on the physical property of the coating material.

Thickness Precision

± 3µm (± 5µm at edges)

Coating Speed

0-300 mm / minute 

Max. Drying Temperature 

150°C

Temperature Accuracy

±2.5°C

Heating Zone Length

710mm (28")

Reeling/Unreeling Shaft

75mm (ID)

Max. Reeling/Unreeling Diameter

300mm (OD)

Max. Coating Length

• ●Depending on the coating and substrate thickness.
• ●Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run

Coating Modes

• ●Using transfer coating technique ( Reverse comma )  for better uniformity 
• ●Two available coating modes selectable on the control panel.
• ●Continuous mode 
• ●Intermittent coating ( system performs coating, stops, coats again and so on. The length of the coating and break segments can be specified by the user ).

Slurry Stirring

SS316 Moving Rod

Exhaust Port Size

127mm O.D

Compressed Air

0.5-0.8 MPa (Air compressor not included. Please click here to order)

Product Dimensions

1650mm ( L) x 1250mm (W) x 1200mm (H)

Warranty

• ●Two Years limited warranty with lifetime support
• ●Rusting and damage due to improper storage condition or maintenance are not covered by warranty

Net Weight

1000 kg 

Shipping Dimension

70" x 50" x 60"