- Battery Manufacturing Equipment
- Battery Laboratory Assembly Equipment
- Battery Pack Assembly Equipment
- Supercapacitor Assembly Equipment
- Dry Electrode Assembly Equipment
- Battery Laboratory Equipment
- Li ion Battery Tester
- Battery Safety Tester
- Battery Material Tester
- Film Coating Machine
- Rolling Press Machine
- Electrode Mixer
- Coin Cell Crimping Machine
- Coin Cell Electrode Disc Punching
- Pouch Cell Sealing Machine
- Pouch Cell Stacking Machine
- Pouch Cell Forming Machine
- Pouch Cell Ultrasonic Welder
- Pouch Cell Electrode Die Cutter
- Cylinder Cell Sealing Machine
- Cylinder Cell Grooving Machine
- Cylinder Cell Slitting Machine
- Cylinder Cell Winding Machine
- Cylinder Cell Spot Welding Machine
- Electrolyte Filling
- Type Test Cell
- Other Battery Making Machine
- NMP Solvent Treatment System
- Li ion Battery Materials
- Ni / Al / Cu Metal Foam
- Cathode Active Materials
- Anode Active Materials
- Coin Cell Parts
- Lithium Chip
- Cylindrical Cell Parts
- Battery Current Collectors
- Battery Conductive Materials
- Electrolyte
- Battery Binder
- Separator and Tape
- Aluminum Laminate Film
- Nickel Strip/Foil
- Battery Tabs
- Graphene Materials
- Cu / Al / Ni / Stainless steel Foil
- Vacuum Glove Box
- Lab Furnaces
- Ball Mill
- Hydraulic Press
- Laboratory Equipment
- Customized Electrode
Lab Manual Pneumatic Battery Crimper Sealer Sealing Machine For Cylindrical Cell Research
Model Number:
TMAX-PNES-50Type:
Hydraulic Sealing MachineDimension(L*W*H):
L290mm*W205mm*H330mmNet Weight:
35kgCompliance:
CE certificateWarranty:
Two Year limited warranty with lifetime supportPayment:
T/T, Credit Card, Paypal, LC, Western UnionDelivery Time:
3 days
Lab Manual Pneumatic Battery Crimper Sealer Sealing Machine For Cylindrical Cell Research
That compact cylinder driven crimper for sealing all types of cylinder cases in battery R&D labs,Standard configuration mold can be used for 18650 battery sealing, Customized die for other cylindrical cell types is available upon request(26650 32650 etc)
Cylinder drive mold for cylindrical battery seal, sealing pressure controlled by manual valve
Technical Parameters:
|
Sealing pressure |
10~150kg/cm2 |
|
Air supply |
compressed air 0.6~1.0MPa |
|
Power supply |
220V / 50Hz |
|
Power |
120W |
|
Outer size |
385mm X 160mm X 325mm |
|
Net Weight |
35kg |
cindy@tmaxcn.com
David@battery-equipments.com
Wechat 13506084915