Email :[email protected]
English
FAQ
products

1400°C Vacuum Chamber Atmosphere Furnace for Silicon Carbide Heating Elements

  • Model Number:

    TMAX-Chamberfurnace1
  • Compliance:

    CE compliant
  • Warranty:

    Two years limited warranty with lifetime technical support
  • Delivery Time:

    14 days
contact now
DESCRIPTION

1400°C Vacuum Chamber Atmosphere Furnace for Silicon Carbide Heating Elements 


TMAX-Chamberfurnace1 vacuum chamber atmosphere furnace for silicon carbide heating elements, USES the three layers of shell structure and the Japanese island of 40 program temperature control system, electric phase-shifting trigger, thyristor control, furnace using polycrystal line alumina fiber materials imported from Japan, equipped with air cooling system between internal and external bile, can rapid cooling.

Using shell overall sealing cover board and the oven door seal adopts high temperature silicone o-rings, oven door is equipped with water cooling system, gas after flowmeter by the breech, after furnace, gas outlet valve discharge by the door of the oven.

The furnace can be sintered in a vacuum. The furnace has a quick connector with KF25 on the side, which can be connected with vacuum pumps. The vacuum pump has a smoke filter and a suction nozzle with a dust filter.

With corrugated pipe, vacuum pump (connected to the furnace and vacuum tube), KF25 quick card sets, vacuum flapper valve, resistance vacuum gauge, etc., whereas the minimum vacuum degree is less than 5 pa, can also be hydrogen and argon, nitrogen, oxygen, carbon monoxide, protective gas such as ammonia decomposition gas, &energy-saving small size, low temperature field balancing, surface temperature and elevating temperature rate, energy saving, universities, research institutes, industrial and mining enterprises do protect the sintering atmosphere, reducing atmosphere with the ideal product.

The sealing of the furnace is made of glove box technology. The sealing effect is very good. It can be used in a vacuum or atmosphere, and it can ensure that the pressure gauge is not deflected within 5 hours.

 

1. Heating element

                    

(1) the hot end roughness d of the silicon carbon rod is 14mm, the average factory adopts 12MM, the heating end is thick, the surface load of the rod is low, and the service life is long.

(2) the length of the cold end of m is 210mm. The average manufacturer adopts 180mm, and the cold end has a low temperature.

(3) the surface oxidation of the silicon carbide rod is compact and can better protect the carbon rod.

 

2. Install air switches and leakage protectors:


When an electric current or leakage, an empty meeting automatically disconnects.

3. Can connect with computer (Optional)

Furnace with communication interface and software, can be directly through the furnace computer control of each parameter, and can be observed from the computer PV on the stove and SV temperature and the running situation, the actual temperature of the furnace curve drawing computer real time, and can keep the temperature data of each time, can call up at any time

 


4. Chamber

                  

Imported                                               VS                                            Chinese

 

1. High quality high pure alumina polycrystalline fiber cured furnace with vacuum suction and filter molding. 

2. Adopt Japanese technology to form.

3. Low heat capacity and low heat conduction coefficient of furnace materials, resulting in less heat dissipation, good insulation and high reflectivity. Temperature equilibrium.

4. Long, high temperature and high resistance to heat and shrinkage of alumina filament.

5. The surface of the furnace is smooth and easy to remove powder.

6. Optional UL certified electrical board (all imported electrical appliances approved by UL)

 

 

Item No.

TMAX-Chamberfurnace1

TMAX-Chamberfurnace1

Power

8KW

13KW

Chamber sizemm

300X200X200

400X300X300

Overall meas.mm

600X620X 1440

700X 710X1540

Voltage

220V

380V

Phase

Single

Single

Heating element

Sic

Temperature controller 

40 programmable segments (Shimaden fp93 made in Japan), 

It can separate into 4,2,1 programs, 

ie. 4x10 segments.

FP93 have 6 PID controls, different PID are used for low,middle,

high temperature for precise control.

Over-temperature and over-current protection, shutdown automatically when thermocouple is broken

( it will shut down power when temperature is higher than 1420⁰or thermocouples is broken, 

"ON" on the board is off and "OFF" is on)

There is Fahrenheit (F) and Celsius (C) for option.


Chamber

1600 Polycrystalline alumina fibre. Imported from Japan

Temperature Accuracy

+/- 1 

Trigger

Phase-shift trigger

Power control

Chint

Controlled silicon

Germany Semikron 106/16E

Max. Temperature

1400 

Constant temperature

1350 

Max. Vacuum Temperature

1200

     Vacuum level in cold

≤10Pa

Heating Rate

≤20 / Min

Recommended Heating Rate

≤10 / Min

Thermocouple

Type S

Surface temperature

≤45

Vacuum pump

VRD-16

Air switch

Certificate

CE Certificate





1.  We supply machines with battery technology support.

2.  We supply full set of lithium battery equipment for lab research, pilot scale research and production line.




1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

3 Responsible for the damage during the shipping process, will change the damage part for you for free.



Copyright © 2016- Tmax Equipments, Roller Press Machine, Ultrasonic Welder