- Battery Manufacturing Equipment
- Battery Laboratory Assembly Equipment
- Battery Pack Assembly Equipment
- Supercapacitor Assembly Equipment
- Dry Electrode Assembly Equipment
- Battery Laboratory Equipment
- Li ion Battery Tester
- Battery Safety Tester
- Battery Material Tester
- Film Coating Machine
- Rolling Press Machine
- Electrode Mixer
- Coin Cell Crimping Machine
- Coin Cell Electrode Disc Punching
- Pouch Cell Sealing Machine
- Pouch Cell Stacking Machine
- Pouch Cell Forming Machine
- Pouch Cell Ultrasonic Welder
- Pouch Cell Electrode Die Cutter
- Cylinder Cell Sealing Machine
- Cylinder Cell Grooving Machine
- Cylinder Cell Slitting Machine
- Cylinder Cell Winding Machine
- Cylinder Cell Spot Welding Machine
- Electrolyte Filling
- Type Test Cell
- Other Battery Making Machine
- NMP Solvent Treatment System
- Li ion Battery Materials
- Ni / Al / Cu Metal Foam
- Cathode Active Materials
- Anode Active Materials
- Coin Cell Parts
- Lithium Chip
- Cylindrical Cell Parts
- Battery Current Collectors
- Battery Conductive Materials
- Electrolyte
- Battery Binder
- Separator and Tape
- Aluminum Laminate Film
- Nickel Strip/Foil
- Battery Tabs
- Graphene Materials
- Cu / Al / Ni / Stainless steel Foil
- Vacuum Glove Box
- Lab Furnaces
- Ball Mill
- Hydraulic Press
- Laboratory Equipment
- Customized Electrode
113um Aluminum Laminated Film For Pouch Cell Case Making
Model Number:
TMAX-Al-L1Compliance:
CE certificatePayment:
T/T, Credit Card, Paypal, LC, Western UnionDelivery Time:
3 days
113um Aluminum Laminated Film For Pouch Cell Case Making
SPECIFICATION
Product name
Aluminum laminated film for lithium ion batteries
Type encoding
LS‐LSMA‐113S
Structure
OPA /AL /CPP
Width
480mm
Thickness
0.113mm
Item |
Test method |
Index |
Result |
|
Thickness |
GB/T6672‐2001 |
Standard thickness ± 10% |
0.113mm |
|
Physical property |
Formability |
Mould no.: 6090 Forming size: 60×90 Forming R value: 2.0 |
≥4mm |
6.2 |
Heat sealing strength |
QB/T2398‐1998 |
≥ 35N/15mm |
58.8 |
|
Fabric/Al peel strength |
GB/T8808‐1988 |
≥ 4N/15mm |
Cannot peel off |
|
AL/CPP |
GB/T8808‐1988 |
≥ 6N/15mm |
10.59 |
|
Electrolyte resistance |
Immerse the sample in 85 ℃ electrolyte(1% water) for 3 days |
No stratification between Al and CPP |
No delamination |
|
≥3N/15mm |
6.77 |
|||
Appearance |
Pinhole
|
Visual |
No visible pinhole |
Meet the requirements |
Scratch |
The scratch length shall not exceed
30mm (random sampling) |
No flesh, no visible scratch |
||
Foreign matter |
No foreign matters and pollution |
Meet the requirements |
||
Note |
1. It is recommended to use a punch made of polytetrafluoroethylene (Teflon), with a molding R angle of not less than 1.2 and a gap of not less than 0.2mm. 2. Due to the difference of equipment and environment, it is recommended that the actual packaging temperature is about 160 ~ 170 ℃, and the packaging time is 1 ~ 3S, or adjust it according to the actual effect. |
|||