Compact Desktop Spin Coater ( Max. 8000 Rpm ) With Complete Accessories

Working Voltage

110V AC / 220V AC selectable

Structure                                   

• Heavy duty Aluminum casting case to keep spinning stable
• 110VDC motor 
• Can not be used under Ar gas

Spin Plates

• Chamber size is 134mm diameter, can accept wafer sample 4" diameter at Max.
• Two 4" stainless steel spin plates are included, which can hold one or multiple samples by wax or double-sided tape
• It is easy and more economical than vacuum chuck。
• One roll of 3M removable double-sided tape (3/4' W x 400" L) is included for immediate use (please click picture below to see specs and order spare tape)

Spin Speed

• Digital display with variable speed up to 8000 RPM
• Digital control panel with two programmable segments of different spin times (1~60s) and speeds

Liquid Injecting

• One 20 mL syringe is included for liquid injection
• Support rod and swing arm of injector are included for easy coating
• The syringe holder height can be adjusted and rotated freely along the support rod

Optional

• You may choose Precision Electronic Single Channel Pipette: 20 - 200uL for more accurate coating (Click Pic 1)
• Using plasma cleaner to treat substrate surface before coating can improve film quality
• You may consider our new product: Heatable syringe 
• Vacuum Flash Assembly for DIY Vacuum Flash-Assisted Solution Process (VASP), Up to 5 mTorr is available (Click Pic 5)

Product

Dimensions

13''(L) x 10''(W) x 7''(H)

Net Weight

30 lbs

Compliance

CE Certified
UL/CSA ready (with addtional certification fee)

Warranty

• Two years limited with lifetime support
• Rusting and damage due to improper storage condition or maintenance are not covered by warranty

Application Notes

• In order to achieve optimal coating quality, please consider cleaning substrates by a plasma cleaner (click picture below for more details) prior to coating. This will significantly reduce the surface tension on the substrates.
• You may place the compact spin coater into a glove box to operate in inert gas 
• Cleaning instruction for the spin coaters.

Warnings

• Do not overflush the water bowl/base with any kinds of liquid. Excess liquid will leak into the motor shaft and cause damage. Please use fabric cloth to wipe out the residues remain in the bow/base.
• If necessary, turn on the water outlet when flushing the water bowl/base to avoid liquid overflowing during the operation.
• For more details about the cleaning procedure, please review the cleaning instruction for the spin coaters.

Shipping

Dimensions

20"(L) x 16"(W) x 18"(H)

Shipping Weight

38 lbs

Item 

Description

Qty

1

VTC-50 Desktop Spin Coater

1

2

4" Dia. Spindle Plate (one installed and one included in package)

2

3

Plastic Cover for operation safety

1

4

20mL Syringe for dropping coating solvent on the plate

1

5

Drain Hose for disposing of waste water

1

6

Removable Double Side Tape for sticking substrate onto the spindle plate

1

7

4" Dia. Soken Tape

5 pcs