Lab Ordinary Double Flat Hydraulic Press Die

Lab Ordinary Double Flat Hydraulic Press Die

Overview：

Ordinary double flat molds are divided into cylindrical flat molds and rectangular flat molds, and general users will choose round flat molds. The simple understanding is that two flat plates of the same shape are flattened on the surface of one flat plate below and the other flat plate is placed on top of the sample. The two flat plates are pressed to form the middle powder sample by a press. It should be noted here that the surface of the pressed sample must be flat, but because there is no fixed model around the mold, the pressed piece must be an irregular circle, which needs to be measured or cut by the user, which is suitable for the sample size Users whose specifications are not too strict.

The double plate mold is a non-standard customized product, and can be produced after the user places an order. Various flat molds can be customized according to user needs, such as cylindrical flat molds, square flat molds, rectangular flat molds, triangle flat molds, hexagonal flat molds, etc. The usual specifications do not exceed 100mm, and other specifications can be customized according to user needs .

Mold maintenance instructions:

1. Please clean the mold after pressing the tablet. You can wipe the mold clean with alcohol, remember not to wipe it with water.

2. If the mold is not used for a long time, it must be oiled or wiped clean and stored in a dry dish.